Videopac / Odyssey2 forum

Videopac / Odyssey2 => Hardware => Topic started by: VideopacBelgium on May 05, 2013, 12:00:35 PM



Title: TheVoice for Odyssey 3 Command Center
Post by: VideopacBelgium on May 05, 2013, 12:00:35 PM
Finding a "Odyssey3 Command Center" is difficult because there are only twenty machines in the world.
But finding a Voice module for the "O3" is even more difficult.
So I assembled this module for mine (of course with the technical help from René).


Title: Re: TheVoice for Odyssey 3 Command Center
Post by: dronspa on May 05, 2013, 08:46:30 PM
Well done!

 ;)


Title: Re: TheVoice for Odyssey 3 Command Center
Post by: VideopacBelgium on May 12, 2013, 01:12:25 AM
I put a quartz 3.2768Mhz instead of the original 3.12Mhz, now TheVoice is more higher & faster.  :)


Title: Re: TheVoice for Odyssey 3 Command Center
Post by: Rene_G7400 on May 13, 2013, 11:13:06 PM
Does it sound like a woman now?  :)


Title: Re: TheVoice for Odyssey 3 Command Center
Post by: VideopacBelgium on May 14, 2013, 10:06:44 PM
... not really.
I would like to experiment with a IC LTC1799  ;)


Title: Re: TheVoice for Odyssey 3 Command Center
Post by: gertk on June 18, 2013, 07:33:00 PM
... not really.
I would like to experiment with a IC LTC1799  ;)

A programmable PLL might be nice too, you could 'bend' the pitch during playback.


Title: Re: TheVoice for Odyssey 3 Command Center
Post by: VideopacBelgium on June 25, 2013, 03:17:04 PM
Finding a "Odyssey3 Command Center" is difficult because there are only twenty machines in the world.
But finding a Voice module for the "O3" is even more difficult.
Finally I was wrong.
It is also easy to find a 0dyssey3 console prototype than the module prototype Voice O3.