Videopac / Odyssey2 forum

Videopac / Odyssey2 => Hardware => Topic started by: alainb91 on May 16, 2017, 08:55:02 AM



Title: Philips Videopac C52/01 (need service manual, mod RGB)
Post by: alainb91 on May 16, 2017, 08:55:02 AM
Hy  ;)

A quick email. I am 47 years old and live in France,  i'm not an electronics pro, and i speak English with Google Translator   :-[

I have a Philips Videopac C52/01 (french country, secam vhf, no PAL chip, red power button, external power cable ) and I am looking for:
- The service manual of this motherboard or any other document.
- Information to add an RGB output (Scart/Péritel).

 ??? There is plenty of information on the forum but rarely complete or not for the right motherboard.

Thank you for your help.
AlainB

My motherboard is identical to this joint picture.


Title: Re: Philips Videopac C52/01 (need service manual, mod RGB)
Post by: VideopacBelgium on May 16, 2017, 11:26:21 AM
Hello Alain & welcome here.
I did it in the past.
The main connections are between the 2 boards.
Main PCB on the left & SECAM PCB on the right (your photo).
Do you want to build yourself the RGB Board (like this photo)?
Or do you want only the connections on the C52/01 ?


Title: Re: Philips Videopac C52/01 (need service manual, mod RGB)
Post by: alainb91 on May 16, 2017, 12:03:09 PM
Hello VideopacBelgium,
Beautiful RGB Board, I want the same ;)

my target :
1) remove the secam pcb (unusable and no sound)
2) I need a RGB Board Electronic diagram AND welding(solder) points for THIS Main PCB.
3) add a scart cable

I found a lot of rgb board electronic diagram, but not for this Main PCB version... i'm lost ;:)

Thx,
AlainB


Title: Re: Philips Videopac C52/01 (need service manual, mod RGB)
Post by: VideopacBelgium on May 16, 2017, 12:26:47 PM
This is the C52/01 RGB mod I've did a few years ago.
The RGB PCB is not the same here (than my previous photo) because I've used a part of a 7200 with the DIN plug.

See: http://videopac.nl/forum/index.php?topic=1180.0


Title: Re: Philips Videopac C52/01 (need service manual, mod RGB)
Post by: alainb91 on May 16, 2017, 04:27:32 PM
 ??? This diagram "C52 RGB Diagram 21x27board Final.JPG" is ok for my PCB ?

Solder point :
L1 = Red (P7-1)
L2 = Green (P7-2)
L3 = Blue (P7-3)
L7=Luminance (P7-7)
L8=+5v (P6-1)
L9 = Ground (P6-2)
L10 = Sound (P6-3)
L14=Composite Syncho (P6-7)
and Pin 39 8048 (for inverter)
and +12v for Status CVBS
and +3v for Status RVB


Title: Re: Philips Videopac C52/01 (need service manual, mod RGB)
Post by: VideopacBelgium on May 17, 2017, 12:05:50 AM
Do you want a PCB like this one?
Or do you want to make your own?


Title: Re: Philips Videopac C52/01 (need service manual, mod RGB)
Post by: alainb91 on May 17, 2017, 08:30:59 AM
Yes I am interested by your PCB.
Do you have a KIT with ICs, diodes, resistors?
What is the price ?


Title: Re: Philips Videopac C52/01 (need service manual, mod RGB)
Post by: Bibibobobubu on June 12, 2017, 02:25:48 PM
Hi, how much cost a kit (or just the PCB) like that ?

I'll try to make one perhaps.

Thanks.


Title: Re: Philips Videopac C52/01 (need service manual, mod RGB)
Post by: grips03 on October 26, 2017, 01:34:42 PM
That is the RGB kit I make.  Let me know if you need one.  Price is $45 + shipping

for use with O2 and G7000.

More details here:
http://atariage.com/forums/topic/260238-o2-rgb-mod/

You can install I did into G7000 here:
http://atariage.com/forums/topic/263348-g7000-mod-pics/