Videopac / Odyssey2 forum
October 16, 2019, 09:56:27 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Al lot of attachments from Nov 2011 till april 2012 are damaged. Please ask the original poster to re-upload if you need them.
 
   Home   arcade Help Login Register links videopac.nl  
Pages: [1]   Go Down
  Print  
Author Topic: Videopac Emulator on Raspberry Pi 3  (Read 4510 times)
tigerinatlanta
Played Munchkin once...
**
Posts: 62


« on: August 02, 2016, 04:50:40 PM »

Does anyone use this? I can get certain games to work using a USB/SNES controller in Retropie.  However, certain games like UFO do not work at all. (No directional movement, or firing action?
Does anyone know how to remap the config or make it work.
Logged
tigerinatlanta
Played Munchkin once...
**
Posts: 62


« Reply #1 on: August 10, 2016, 07:46:18 PM »

Finally got this working for anyone who is interested doing this going forward.

Basically any game that uses Left Key Controls(Player 2) as the primary input needs to have an individual config file created to go with the accompanying .bin file.
An example of one of these games is UFO.

The file path for this is the same as where you put the roms:

/home/pi/RetroPie/roms/videopac
UFO.bin (This is the rom File)
UFO.bin.cfg (Manually created config file which has to match the bin file in syntax since Linux is case sensitive)

The lines of code to put in the .cfg file are as follows below:

------------------------------------------
input_player1_joypad_index = "1"
input_player2_joypad_index = "0"
input_enable_hotkey = "ctrl"

-------------------------------------------
You will also need to add the Hot Key to the existing retroarch.cfg file.
 /opt/retropie/configs/all

Add this line to the bottom of this file:
input_enable_hotkey = "ctrl"

=============

This will enable you to play using only 1 Joystick.
You will be able to exit by doing a "ESC" + "CTRL" after completing your game, and will exit back to the Videopac emulator.




« Last Edit: August 10, 2016, 08:03:18 PM by tigerinatlanta » Logged
pat71
Trying to get the cartridge in...
*
Posts: 3


« Reply #2 on: August 14, 2016, 04:55:59 PM »

thanks, that's work fine. Do you habe a manual for the parameters in the config file?
Logged
tigerinatlanta
Played Munchkin once...
**
Posts: 62


« Reply #3 on: August 18, 2016, 08:15:51 PM »

Unfortunately, I do not.
Logged
gertk
Post Axe Pete!
*****
Posts: 859



gertk64
WWW
« Reply #4 on: August 19, 2016, 06:47:42 PM »

There is a forum for RetroPie:

https://retropie.org.uk/forum/
Logged

>>G7000 G7200(P+S) G7400 N60 JET27 VG5000 ZX80 ZX81 ORIC-1 COMX35 Aquarius<<
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!