Videopac / Odyssey2 forum
September 26, 2020, 05:36:14 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you have some news and you want it to be shown here, pm Janzl!
 
   Home   arcade Help Login Register links videopac.nl  
Pages: [1] 2   Go Down
  Print  
Author Topic: G7200 looking for contrast button (original or printed)  (Read 1366 times)
S_W
Trying to get the cartridge in...
*
Posts: 7


« on: November 07, 2019, 11:52:58 PM »

Hi there,
I am looking for the contrast adjustment button for the videopac g7200.
The original would be the best, but a 3D print, or even the plan are welcome.
If you have it in stock, you can help and save a videopac! Smiley
Thank you for your help
here a pic...

https://servimg.com/view/19640220/5
More thanks...
Logged
Relo
Trying to get the cartridge in...
*
Posts: 16


« Reply #1 on: November 09, 2019, 01:10:42 AM »

If someone has the dimensions and a picture from all sides I can probably easily create one in Max and print it.
Logged
S_W
Trying to get the cartridge in...
*
Posts: 7


« Reply #2 on: November 14, 2019, 01:15:24 AM »

someone can give all infos ? thx a lot !
Logged
S_W
Trying to get the cartridge in...
*
Posts: 7


« Reply #3 on: December 12, 2019, 11:57:48 AM »

i m sure to be in the right forum for save my G7200 Smiley 
help help help !
Logged
Stwert
Trying to get the cartridge in...
*
Posts: 1


« Reply #4 on: December 29, 2019, 11:12:07 AM »

My G7200 is also missing this, I'm waiting on my new micrometer arriving (and free time, a rare commodity these days) to take some measurements before I create a model.
But I'll have to, ideally, get (as above) lots of photos from all angles to maker it accurate.

Of course, if someone beats me to making one all the better  Tongue

If, and when, the stars finally align and I make a model, I'll be sure to pop back on here with it.
Logged
S_W
Trying to get the cartridge in...
*
Posts: 7


« Reply #5 on: February 20, 2020, 04:34:05 PM »

really nobody can help ?
Cry
Logged
immergruen
Freedom Fighter
****
Posts: 270


« Reply #6 on: February 21, 2020, 12:34:56 AM »

share a 3d file and i can print it for you
Logged
S_W
Trying to get the cartridge in...
*
Posts: 7


« Reply #7 on: February 24, 2020, 06:58:42 PM »

someone for make a good 3d file ? Thx !
Logged
Tom31
Played Munchkin once...
**
Posts: 94


« Reply #8 on: March 18, 2020, 09:53:37 PM »

Hi S_W
I have replaced my button to make the messurement.
Hope it will helps you to make a new one.
Best regards
Thomas
Logged
immergruen
Freedom Fighter
****
Posts: 270


« Reply #9 on: March 19, 2020, 10:01:19 PM »

If you create a 3d file (eg using Tinkercad.com), I can print it.
Logged
Relo
Trying to get the cartridge in...
*
Posts: 16


« Reply #10 on: March 29, 2020, 02:47:28 PM »

I'll make and print one when I have time

Edit:
https://imgur.com/gallery/OAo2ak4

I don't know if the "wing" is on the right side and had to eyeball the measurements on the grabber a bit, as well as the crossbar. Also is it possible to connect the "wing" to the center base and it would still function? That would make it a lot easier to print.
« Last Edit: March 29, 2020, 04:02:36 PM by Relo » Logged
S_W
Trying to get the cartridge in...
*
Posts: 7


« Reply #11 on: May 01, 2020, 05:35:53 PM »

Sorry i haven't been here for a few weeks

Tom31 LOVE U !!! Wink thanks a lot

Relo , it's already super advanced, I'm taking your model Smiley  For your question, i don't know , i never get it in my hand :/

Hi S_W
I have replaced my button to make the messurement.
Hope it will helps you to make a new one.
Best regards
Thomas
Logged
Tom31
Played Munchkin once...
**
Posts: 94


« Reply #12 on: May 01, 2020, 07:02:31 PM »

 Smiley Smiley Smiley
Please show us the result when it's done!!!
Logged
Relo
Trying to get the cartridge in...
*
Posts: 16


« Reply #13 on: May 02, 2020, 01:53:01 AM »

You might actually want the files  Wink

https://mega.nz/file/gk5xhIJb#Be2a23U6yuLVmRTLme65wq_VzqhSE1GIDIZZ_DoPaaM

Made a OBJ for easy editing for someone else. And a printable STL version in 2 parts that can be easily glued together. Only thing that really is hard to print I imagine is little claw thing on the end.
If any edits need to be made feel free to ask, and if it fits perfectly show photo's Grin

BTW if it needs to be printed, I have a printer. Might be easier to let it be done locally.
Logged
S_W
Trying to get the cartridge in...
*
Posts: 7


« Reply #14 on: May 02, 2020, 03:01:06 PM »

Relo + Tom31 = LoveForever Wink LoV LoV LoV !!!

My First printer 3d is comming soon (i hope if the ship from china come a day!)  i waiting for it try to print it asap !

immergruen : thanks for offer, i can (soon) do it myself Smiley
Logged
Pages: [1] 2   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!